URGENT : Plese remove color ribbon that runs along the transfer roll, as it will not come off the shirt.

1^st Press : Apply FIRM PRESSURE at 300-315 degrees for 10-13 seconds with the image in the proper placement. Experiment with your heat press for optimal results.

Hot Peel : 

• Hot Peel : Immediately with one swift motion peel off the film.

2^nd Press : Apply FIRM PRESSURE at 300-315 degrees for 3-5 seconds.

Note : FIRM and EVEN pressure is important for good adhesion. Avoid any pockets, seams, buttons, zippers, etc. within the press area.

Polyester/Blend Fabric : Lower the temperature to 300~ degrees and shorten the time to 10-12 seconds, as these fabrics absorb heat at a faster rate. Press multiple times if needed with cooling time in between.

100% Polyester : Lower the temperature to 250-285 degrees and shorten the press time to 3-8 seconds. Practice to determine the best time, temperature, and pressure. Press multiple times if needed with cooling time in between.